1. Contest is open to two-
Cut tires are allowed in modified class only
3. Dual wheels, chains, stud, or paddle tires are not permitted.
4. Tractor must have
working brakes capable of safely stopping the machine.
5. Wheelie bars or skid plates
are mandatory.
6. Each tractor may be entered only once per class per driver.
One
pull per tractor unless it is a test pull or a tie. (Except youth class)
7. Each driver
is allowed two attempts within the 25’ mark. Second attempt is official.
8. No portion
of the tractor may interfere with the sled or chain during pull.
Chain and kill
switch cord must be easily hook able without interference.
9. Tractor may not exceed
six feet in width or extend more than eight feet in front of the rear axle.
10. Weight bracket/weights may not extend behind the rear of the rear tire. Weights must be securely
fastened. Weights lost while pulling will cause disqualification.
11. Turf tires
must have the word “Turf” written on them by the factory. Tires marked “AT” or “ATV”
will
not be permitted in stock class. Cut tires, professional pulling tires or tires modified in any way will
not be allowed in stock class. Stock class must have working governor, RPM not to exceed factory
recommended RPM. Engines over 4000 RPM must have billet steel flywheel. All tractors will be RPM
and tech checked. Modified must have operable kill switch. Tech inspectors have final say in all
matters.
12. Maximum tire size 26x12x12. It is the puller’s responsibility to provide proof of tractor’s eligibility.
13. Classes: Draw bar height may not exceed 13”
1.) Youth
2.) Factory Stock (1&2 cylinder pull together)
a) 1050#
b) 1250#
3.) Modified (1&2 cylinder pull together)
a) 1050#
b) 1250#
4.) Super Modified
a) 1050#
b) 1250#
5.) Big Wheel Economy
a) 1500#
b) 2000#
6. Exhibition
14. Tractor must be weighed in
before pulling and must be at the starting gate when number is called or
will forfeit turn.
15. Driver must stop if horn sounds.
16. General rules apply
to all classes.